Heavy Duty Low Profile Bucket

FEATURES

  • Grade 50 steel side stiffeners, nearly 40% stronger than regular steel
  • Optional bolt-on cutting edge

SPECIFICATIONS

Weight 175 lbs.
Overall Width 49.75”
Overall Height 15.75”
Overall Length 33”
Cutting Edge 1/2” x 4”

4 in 1 Bucket

FEATURES

  • 6 features in 1 bucket
  • 2 - 3000 psi hydraulic cylinders
  • Grade 50 steel with side stiffeners, nearly 40% stronger than regular steel
  • Bucket bottom and clamshell are reinforced
  • Optional bolt-on cutting edge
  • Multi-tasking bucket keeps you productive
  • Great for site cleanup, scraping, and brush removal

SPECIFICATIONS

Overall Width 49.5”
Overall Height 20.5”
Overall Length 34”
Grapple Opening 18.5”
Cutting Edges (Qty 3) 1/2” x 4”
Weight 330 lbs.

Tooth Bucket

Rock Bucket

Rock Picker / Sifter

FEATURES

  • Grade 50 steel teeth nearly 40% stronger than regular steel
  • Rugged tool great for landscaping, demolition, roots, rocks, brush, debris, and other difficult-to-grasp material
  • Designed for digging out materials from demolition work
  • Combing and grooming the ground while screening material

SPECIFICATIONS

Weight 200 lbs.
Overall Width 49.75”
Width Between Rods 2.75”
Width Between Lower Teeth 14.25”
Digging Teeth Lower (qty) 4

Land Plane

Stump Bucket

Power Rake

FEATURES

  • Direct drive design
  • Float mount design for a more efficient operation
  • Depth changes on-the-go
  • Tungsten - carbide teeth
  • Solid rubber wheels; with one pin can be raised out of the way for serious digging
  • Side plates are adjustable and removable
  • Spiraled teeth for windrowing
  • Power angling (optional)

SPECIFICATIONS

Angling Manual
Working Width 48”
Working Depth 0-2.5”
Max. Angle (both ways) 25°
Overall Width 56.75”
Overall Length 55.5”
Rated Flow (GPM) 9-15
Weight 470 lbs.

Tiller

FEATURES

Tills up to 4” deep
Bi-directional rotation increases efficiency by saving time and labor
Direct-drive motor gives higher production with lower maintenance
Replaceable, double edge, hardened tines for prolonged life

SPECIFICATIONS

Overall Width (in) 50.5”
Tilling Width (in) 37”
Tilling Depth (in) 0”-4”
Overall Height (in) 19.5”
# of Tines 32
Tine Rotation Bi-Directional
Weight 570 lbs.
Drive Line 1 motors
Hydro Flow Needed (gpm) 7-14
Hydro Pressure Needed (psi) 2500
Drive direct

Rotary Cutter

FEATURES

  • Cuts moving forward and reverse
  • Hydraulic motor with pressure relief
  • Hydraulic motor operates both directions
  • No shear pins or drive clutches
  • Dual-edge cutting blades for longer life
  • Cut, clear, and mulch unwanted brush, thickets, grass, and saplings up to 2” in diameter
  • Open front deck design allows for blades to start cutting a sapling without needing to push it over first
  • Break new trails, clear ditches, construction property sites, and other overgrown areas

SPECIFICATIONS

Overall Height 17.75”
Overall Length 62”
Deck Length 53.5”
Overall Width 48.25”
Cutting Width 43.75”
Deck Thickness 7 gauge (.179”)
Rated Flow (GPM) 7-15
Operating Weight (approx.) 420 lbs.

Pick-Up Sweeper

Options
48" w/ Poly Wafer Package
48" w/ Poly/Steel Wafer Package

FEATURES

  • Direct drive design
  • Adjustable arbor allows control over bristle pressure to surface while extending bristle life
  • Replaceable cutting edge
  • Completely covered to control dust. Ideal for warehouses, machine sheds, parking lots, job sites, etc. where dust containment is a MUST!
  • Reversible bristle direction for multi-purpose

SPECIFICATIONS

Working Width 45”
Overall Width 57”
Overall Height 25”
Bristle Diameter 24”
Cutting Edge Specs 1/2” x 4” bolt-on
Drive System Direct Drive Hyd. Motor
Rated Flow (GPM) 7 - 15
Operating PSI 2000 - 3000
Weight 440 lbs.

Rotary Sweeper

Options
48" Manual w/ Poly Wafer Package
48" Manual w/ Poly/Steel Wafer Package
48" Hydraulic w/ Poly Wafer Package
48" Hydraulic w/ Poly/Steel Wafer Package

FEATURES

  • Easy operation
  • Exclusive Torsion Float Suspension
  • Fast bristle change time
  • Manual 25° right and left angle
  • Optional power angling 25° right & left angle
  • Requires minimum hydraulic system of 10 GPM @ 2000 psi
  • Greaseable bearings for longer wear life
  • Hydraulic drive motor (no chains) mounted inside brush arbor

SPECIFICATIONS

Working Width 48”
Working Width at 25° Angle 43.5”
Overall Width 58.5”
Max. Angle (both ways) 25°
Bristle Diameter 24”
Rated Flow (GPM) 7 - 15
Operating PSI 2000 - 3000
Weight 280 lbs.

Pallet Forks

Grapple Fork

Trencher

Options
6" Cupped Chain
6" 50/50 Cupped w/ Bullet Chain
6" 50/50 Cupped w/ Scorpion Chain
8" Cupped Chain
8" 50/50 Cupped w/ Bullet Chain
8" 50/50 Cupped w/ Scorpion Chain

FEATURES

  • Direct drive design
  • 3’ boom with crumber shoe that is removable
  • 12” spoil auger that is removable

SPECIFICATIONS

Overall Width 40.38”
Overall Height 24”
Overall Length 79.38”
Trenching Depth @ 60° 38”
Operating PSI 2000 - 3000
Rated Flow (GPM) 7-15
Shaft Speed (rpm) 85-185
Weight (3’ x 6” Double Chain) 600 lbs.

Auger

FEATURES

  • Direct drive design
  • 2” hex head
  • Auger head pivots front-to-back and side-to-side
  • Pivot side-to-side has a locking method provided

SPECIFICATIONS

Max. Diameter 30”
Rated Flow (GPM) 7-15
Shaft Speed (rpm) 54-115
Operating PSI 2000 - 3000
Weight (9” bit) 360 lbs.

Mini Backhoe

Backhoe

Features

  • Operator seat swings to allow better visibility of work area
  • Optimum performance with 5-7 GPM hydraulic system
  • Dual cylinder swing provides maximum swinging power
  • All main pivot points greasable for easy maintenance
  • Full width replaceable bronze bushings on all wearable pivot points
  • Boom & rotation lock for transport
  • 9”, 12”, (3 teeth), 15”, 18” (4 teeth), 24” (5 teeth) and 24” ditching bucket (no teeth)
  • Street pads optional
ModelBH780 
Transport Height (fully retracted)68” 
Transport Width (stabilizers up)36” 
Transport Length64” 
Transport Weight675 lb. 
Ground Clearance7.5” 
Digging Depth (2 ft. flat bottom)78” 
Overall Operating Height (fully raised)91” 
Loading Height (bucket at 60°)63” 
Reach from Swing Post104” 
Swing Arc180° 
Stabilizer Width (spread position)81” 
Stablizer Width (transport)36” 
Stabilizer (below grade)10” 
Operating Pressure 2,250 PSI 
Dipper Stick Digging Force SAE1,890 lb. 
Bucket Digging Force SAE3,450 lb. 
Boom Lift Capacity515 lb. 
Hydraulic Volume Requirements5-7 GPM 
Main Boom Cylinder Diameter2.25” 
All Other Cylinder DiameterDipper 2.25”, Rest 2” 

Hydraulic Hammer

FEATURES

  • Power booster for high performance and lower vibration
  • Central lubrication
  • Field replaceable bushing for easier maintenance
  • Hybrid technology (gas/oil)
  • Innovative design with fewer components for higher reliability
  • Effective noise and vibration damping
  • Highly efficient internal control valve

SPECIFICATIONS

Service weight (lb) 258
Carrier weight class (lb) 2,900-6,600
Operating pressure (psi) 1,600-1,890
Oil flow range (gpm) 4-9
Impact rate (bpm) 560 - 1700
Input Power (kW) 8
Working tool diameter (in) 1.65
Sound Power level [dB(A)] 109

Claw Grapple

FEATURES

  • Grade 50 steel teeth nearly 40% stronger than regular steel
  • 1-3000 psi hydraulic cylinder
  • Opens to 36”
  • Curved teeth allow the grapple to glide over the ground, raking and cleaning the surface without damaging it
  • Clear brush, pick rocks, and mulch
  • Raking and piling, storm cleanup and demolition
  • Use as a root rake
  • Excellent for back dragging
  • Grapple encloses totally and positively secures debris

SPECIFICATIONS

Weight 375 lbs.
Overall Width 48.63”
Width Between Teeth 6.38”
Height w/Teeth Closed 27”
Max. Height w/Teeth Open 37.25”
Maximum Opening 36”
Grapple Teeth (upper) 7
Grapple Teeth (lower) 8

Root Grapple

FEATURES

  • 1 1/4" pivot pins in bushings
  • 10" stroke 2" bore welded cylinder
  • Protected cylinder and lines
  • Available from 36" to 50" wide
  • Bolt-on-edge included

Open Bottom Grapple Bucket

FEATURES

  • Grade 50 steel teeth nearly 40% stronger than regular steel
  • 2 - 3000 psi hydraulic cylinders
  • Rugged tool great for landscaping, demolition, roots, brush, debris, and other difficult-to-grasp material
  • Designed for digging through the dirt to pick up unwanted material and leaving dirt behind
  • Excellent tool for digging and pulling out materials from demolition work
  • Clearing, combing and grooming the ground, and screening material
  • Clear, dig, extract, grab, and sift all-in-one tool

SPECIFICATIONS

Weight 330 lbs.
Overall Width 49.75”
Width Between Rods 2.75”
Width Between Lower Teeth 14.25”
Height w/Teeth Closed 20.75”
Height w/Teeth Open 30”
Maximum Opening 27”
Digging Teeth Lower (qty) 4

Grapple Bucket

FEATURES

  • 1 1/4" pivot pins in bushings
  • 10" stroke 2" bore welded cylinder
  • Protected cylinder and lines
  • Available from 36" to 50" wide
  • Bolt-on-edge included

Stump Grinder

FEATURES

  • Bi-directional cutting design allows for dual pass operation
  • 24 - durable carbide teeth - a real time saver, lessens labor
  • 1/2” x 14.5” diameter steel plate cutting wheel
  • Up to 1000 rpm cutting wheel speed
  • Maximum cutting depth 6” below ground

SPECIFICATIONS

Shipping Weight 525 lbs.
Hydraulic Requirements 7-14 GPM
Maximum Cutting Diameter 36”
Maximum Cutting Depth 6” Below Ground
Cutting Arc 66 Degrees
Cutting Wheel Diameter 18”
Cutting Wheel Speed 500-1000 RPM
Teeth 24 Replaceable Carbide

6 Way Dozer Blade

FEATURES

  • Adjustable skid shoes for control of cutting edge depth
  • Bolt-on cutting edge
  • Standard with tilt cylinder (angle cylinder optional)
  • Not recommended for snow removal due to NO trip moldboard

SPECIFICATIONS

Angling Manual
Overall Width 49.5”
Overall Height 21.25”
Overall Length 28.25”
Side Angle (both ways) 25°
Tilt Angle (both ways) 10°
Cutting Edge 1/2” x 4”
Weight 265 lbs.

Snow Blade

FEATURES

  • 21.25" curved moldboard
  • Strong, high carbon steel cutting edge for long life
  • Moldboard has two (2) spring trips for component protection
  • Easy adjust depth shoes
  • 25° left/right angling
  • Hydraulic angling (optional)
  • Locking trip design for light material grading and all season use

SPECIFICATIONS

Angling Manual
Width 49.5”
Height 21.25”
Working Width at 25° Angle 44”
Trip Type Moldboard
Cutting Edge 1/2” x 4”
Weight 220 lbs.

Snow Blower

FEATURES

  • Direct drive hydraulic auger
  • Replaceable bolt-on high carbon-steel cutting edge
  • Hydraulic relief – no shear pins
  • Easily-adjustable depth skid shoes

SPECIFICATIONS

Stage 2
Width of Cut 53”
Cutting Height 22”
Cutting Edge 3/8” x 3” Bolt-on
Skid Shoes Adjustable
Auger Diameter 12” Open Flight
Fan Diameter 16” 4-Blade
Chute Rotation Hydraulic
Pressure Relief Fan Only
Casting Distance up to 25’
Approx. Ship. Weight 418 lbs.
Hoses Included
Hyd. Flow Req. 10-14 GPM

Tree Boom

Trailer Spotter

Sod Roller